Assembly

WALL FIREPLACE WITH DO-IT-YOURSELF ASSEMBLY

The wall fireplace Fuecopared is easy to install as it does not require any work on walls or existing utilities (no connection is required to electricity or gas mains).

It easily fits in any environment, as it is hung on a wall of the room like a painting, thanks to a maximum depth of 12 centimeters.

The versatility of the wall fireplace is guaranteed also by the reduced size, the minimum space required and the minimum weight, which meets all the needs.

Easy to apply through the metal guides supplied, to be affixed on any of the four walls of any local: from the living room to the dining room, or in the bedroom and even in the bathroom.

WHAT DOES IT NEED FOR THE INSTALLATION?

The wall fireplace Fuecopared is not subject to any legislation, and it doesn’t need special permits.

Moreover it doesn’t use the chimney because the combustion of the bioethanol doesn’t produce toxic substances, odours or smoke that must be taken out.

It doesn’t need fixed connections for the supply, being independent.

It is necessary instead, that in the room where it is working, there will be a minimum airflow obtained with air intakes, also on the wall, or another system with a minimum of 200 mmq.

DIY ASSEMBLY PROCEDURE

1 – WALL PUNCTURING

1.1)  Locate the type of wall where to install the wall fireplace Fuecopared (brickwork, stone, wood or drywall)

1.2) Do the first four holes, with a percussion drill, for the lower guide of the two metal guides supplied

1.3) Insert the 8 millimeters nylon dowels supplied

2 – INSTALLATION OF THE GUIDES

2.1)  Assemble the first metal guide by inserting and screwing the screws supplied

2.2)  Do the second four holes at an exact distance of 40,6 centimeters from the holes below

2.3)  Assemble the second metal guide supplied

2.4) Check that the wheelbase distance between the two bars will be exactly of cm. 40,6.

3 – INSTALLATION OF THE FIREPLACE PANEL

3.1)  Position the fireplace panel in correspondence of the guides on the wall

4 – INSTALLATION OF THE BOWL

4.1)  Position the bowl and the burner of the fireplace